Correction control
Use the 15mm orbit and variable speed range to frame paint-correction work where a dual-action movement is preferred.
20V cordless / 15mm orbit
20V Cordless Dual-Action Polisher for Mobile Detailing
Build a portable correction and finishing range around a brushless dual-action tool with variable speed and a 125mm backing pad. Compare a cordless dual-action polisher supplier and review the specification signals behind a 20V random orbital polisher program.
2000-5000 rpmVariable no-load speed
15mm orbitRandom orbital adapter
125mm padBacking pad size
Detailing job map
Give one cordless tool a clear role in the workflow
Waxing, sealing, mirror finishing and paint correction place different demands on pad choice, speed and operator control. Start with the job, then specify the tool.
Finishing consistency
Match the 125mm backing pad and chosen compound to the panel and finish target rather than treating every surface the same.
Mobile reach
A cordless setup removes the power-outlet constraint for garages, driveways and job sites while keeping the tool compact.
A compact tool body and anti-slip grip keep handling straightforward during mobile detailing work.
Tool specification
Separate the signals that decide the quote
Voltage, battery capacity, orbit, pad size and speed answer different sourcing questions. Keep each value visible so a buyer can compare a cordless program without blending units.
| Model | SGGF323 / SGGF346 / SGGF347. |
|---|---|
| Battery | 20V listed voltage; 5.0Ah capacity; 1 battery and 1 charger listed. |
| Speed | 2000-5000 rpm no-load speed with electronic control. |
| Movement | 15mm random orbital adapter with 125mm backing pad. |
| Protection | Carbon brushless motor and overcurrent protection; CE listed. |
| Dimensions / weight | 398 x 125 x 136mm; approximately 1.72kg. |
Range fit: confirm battery platform, charger pack, pad system and target market before requesting a wholesale configuration.
Motion and surface
Read dual-action movement alongside the surface task
Orbit size and speed are useful only when they are connected to the pad, compound and finish the operator needs to create.
Waxing and sealing
Use a controlled speed and compatible pad to spread product evenly across a prepared surface.
Mirror finishing
Keep the pad and compound brief precise when the end goal is gloss and a clean reflected finish.
Paint correction
Frame correction around panel condition, orbit, speed and operator technique instead of a single headline number.
Wholesale brief
Bring the real detailing context to the first reply
A clear use case lets the product team scope the right battery, pad and accessory combination for your market.
- Primary taskWaxing, sealing, finishing, correction or a mixed workflow.
- Surface rangeVehicle panels, vertical surfaces, shop work or mobile jobs.
- Power packageBattery quantity, charger, voltage platform and regional needs.
- Order planExpected volume, accessory mix and target launch timing.
Related reading
Three articles for the next polisher decision
Explore application, specification and motion topics that help teams compare the cordless tool with a clear use case.
Cordless random orbital polishers for waxing, sealing and mirror finishing
Place a cordless tool in real waxing, sealing, finishing and correction tasks.
Read the application article20V, 5Ah, 125mm and 15mm specs in a cordless polisher
Read voltage, battery capacity, pad size, orbit and rpm as separate buying signals.
Read the specification articleWhat dual-action random orbital movement means in cordless polishers
Separate tool motion, orbit size, pad size and rpm when comparing supplier terminology.
Read the movement articleFAQ
Questions to settle before a wholesale order
What voltage does the polisher use?
The cordless system uses a 20V battery platform, with the listing also describing an 18V (20V max) lithium battery system.
What orbit and backing pad sizes are available?
This configuration uses a 15mm random orbital adapter and a 125mm backing pad.
What speed range can the operator set?
The adjustable no-load range is 2000-5000 rpm with variable speed control.
Which detailing tasks fit a cordless dual-action tool?
Waxing, sealing, mirror finishing and paint-correction work can all fit a cordless dual-action workflow when the pad and compound match the surface.
What safety features are listed?
Electronic speed control, overcurrent protection and a carbon brushless motor are part of the listed configuration.
What should a wholesale inquiry include?
Include the target market, battery and charger quantity, pad requirements, expected volume and detailing tasks for the range.